- 01923 969309
- Sales@pandd.co.uk
Automatic 15% discount for all contractors on all orders over £100 excluding VAT
-
0
-
Your cart is currently empty.
-
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping.
The WPEPME08/SP is an IP65 PME consumer unit for single-phase EV charging circuits. It combines a 40A C Curve Type A RCBO, PME fault monitoring and a factory-fitted Type 2 surge protection device in one pre-wired enclosure.
This version suits installations that require residual-current and overcurrent protection in the consumer unit as well as coordinated surge protection. The RCBO does not replace any DC residual-current protection required by the connected charger, so the complete protective arrangement must be checked before installation.
Installer Tip: Choose this SP model when the design requires both a 40A Type A RCBO and Type 2 surge protection. If SPD protection is provided elsewhere, compare the WPEPME08/C40 RCBO version.
Key Features
- 40A C Curve Type A RCBO – combined overcurrent and Type A residual-current protection
- Type 2 SPD – factory-fitted surge protection
- PME fault monitoring – switches line, neutral and protective conductor through the linked contactor arrangement
- IP65 enclosure – suitable for appropriately located indoor or outdoor installations
- Pre-wired assembly – built and tested before dispatch
- Automatic under-voltage recovery and manual reset following over-voltage operation
PME Fault Protection for EV Charging
The built-in monitoring arrangement checks the supply against the manufacturer’s stated under-voltage and over-voltage thresholds. When a qualifying abnormal condition is detected, the assembly operates its linked switching arrangement to disconnect line, neutral and the protective conductor. Under-voltage recovery is automatic; an over-voltage operation requires manual reset.
Final selection still depends on the charger, supply characteristics, earthing arrangement and the protective devices already present. Installation, inspection and testing must be completed by a suitably qualified person in accordance with the manufacturer’s instructions and the current edition of BS 7671.
Compare IP65 PME Consumer Units
| Model | Circuit Protection | Included Protection |
|---|---|---|
| WPEPME08/C40 | 40A C Curve Type A RCBO | PME fault detection |
| WPEPME08/SP (This Product) | 40A C Curve Type A RCBO | PME fault detection + Type 2 SPD |
| WPKPME08/C40 | 40A MCB | PME fault detection |
| WPKPME08/SP | 40A MCB | PME fault detection + Type 2 SPD |
