Your basket
Loading your basket…
Prices exclude VAT. VAT, shipping and discounts are calculated at checkout.
32A RCBOs are designed for higher-load circuits that require combined overcurrent and earth leakage protection in a single device. They are widely used for EV charger feeds, heat pumps, showers, cooking appliances and small commercial equipment where dependable fault protection and accurate disconnection times are essential.
These RCBOs provide full Type A sensitivity, detecting both AC and pulsed DC leakage — a requirement for modern inverter-driven loads. They are available in both B-curve and C-curve options, allowing installers to match the protective device to the inrush characteristics of the connected equipment.
Whether used in new installations or retrofit upgrades, 32A RCBOs provide stable, compliant protection for circuits that routinely carry higher continuous loads or experience occasional surge currents.
The WER32C-030 is a 32A C Curve Type A High Immunity RCBO designed for circuits with higher inrush characteristics and modern electronic loads where...
The WER32B-030 is a 32A B Curve High Immunity Type A RCBO, engineered for solar PV, battery storage, and EV-ready consumer units. It provides...
The WRB132B-030 High Immunity Type A Mini RCBO is a 32A B Curve protective device designed for medium-load circuits in residential and light commercial...
The WRB132C-030 High Immunity Type A Mini RCBO is a 32A C Curve protective device engineered for circuits with higher inrush demands. Its slim...
The WRT332B-030 is a 3-pole Type A RCBO providing combined residual current and overcurrent protection for three-phase circuits. Rated at 32A with a B...
The WRT132C-030 is a 32A C Curve Type A RCBO combining overcurrent and residual current protection in a compact single-module device. It features switched...
The WRT132B-030 is a 32A B Curve Type A RCBO that delivers overcurrent and 30mA residual current protection in one slimline device. It features...
The WRN32B-030 is a 32A Type A RCBO in a compact single-module, 2-pole design. Combining residual current (RCD) and overcurrent (MCB) protection in one...
The WRT332C-030 is a 3-pole Type A RCBO designed to provide combined residual current and overcurrent protection for three-phase installations. Rated at 32A with...
The WRN32C-030 is a 32A Type A RCBO with a C-curve tripping characteristic, supplied in a single-module, 2-pole format. Combining residual current (RCD) and...
The WFD132B-030 is a 32A, B Curve Arc Fault Detection (AFDD) RCBO, combining arc fault detection, 30mA Type A residual current protection, short-circuit, and...
A 32A RCBO is the standard choice for dedicated high-load circuits. It delivers both overload and earth leakage protection while supporting equipment that draws more current than typical domestic outlets or lighting circuits.
B Curve: Suitable for standard domestic circuits and predictable load behaviour.
C Curve: Better for circuits with motors, compressors or tools that cause high inrush currents on startup.
Selecting the correct curve prevents nuisance tripping and ensures the RCBO operates in line with its designed characteristics.
All 32A RCBOs in this category meet BS 7671 (18th Edition) requirements and comply with IEC/EN 61009. Type A detection ensures proper protection for modern appliances, heat pumps, EV chargers and other equipment that may introduce pulsed DC into the circuit.
They offer clean separation of circuits, easier fault diagnosis and full compliance with modern consumer unit layouts. Compact module sizes, switched neutrals and stable disconnection performance make them the preferred choice for any higher-load dedicated circuit.
$132.00 ex VAT
VAT: Product prices exclude VAT. VAT is added at checkout.
