6kA MCBs for Standard Domestic & Light Commercial Circuits
6kA MCBs are miniature circuit breakers designed for use on circuits with standard domestic or light commercial fault levels. They provide overload and short-circuit protection for final circuits in most homes, small offices and general-purpose boards where the prospective fault current remains within 6,000 A.
Read more
These devices are the typical choice for consumer units and small distribution boards, covering lighting, socket circuits, immersion heaters, small motors and general fixed loads. Available in a full range of current ratings and tripping curves, they allow installers to match protection to circuit design and load characteristics.
- 6kA breaking capacity for standard domestic installations
- B and C curve options for different load types
- Ratings from 6A upwards for lighting, sockets and appliance circuits
- Single-module DIN-rail format for quick fitment
- Reliable disconnection in typical household fault conditions
6kA MCBs are used in the majority of residential properties and smaller commercial units where fault level calculations confirm that 6kA breaking capacity is sufficient for safe operation.
6kA MCB – 6A 1 Pole B Curve (WMC106B)
£1.84
£2.99
The WMC106B is a 6A single-pole 6kA Miniature Circuit Breaker (MCB) designed to provide reliable overcurrent and short-circuit protection on domestic and light-commercial lighting circuits. Rated for 230/400 V AC operation, it features a B-curve tripping characteristic that reacts at 3–5 × rated current -...
6kA MCB – 32A 1 Pole B Curve (WMC132B)
£1.84
£2.99
The WMC132B is a 32 A single-pole 6 kA Miniature Circuit Breaker (MCB) engineered for high-load domestic and light-commercial circuits such as cookers, immersion heaters, and fixed plant. It features a B-curve tripping characteristic that operates at 3–5 × rated current to deliver precise overcurrent...
6kA MCB – 6A 1 Pole C Curve (WMC106C)
£2.00
£3.40
The WMC106C is a 6 A single-pole 6 kA Miniature Circuit Breaker (MCB) providing dependable overcurrent and short-circuit protection for lighting and auxiliary circuits with higher inrush current such as LED drivers, transformers and control gear. Its C-curve tripping characteristic (5–10 × In) offers greater...
6kA MCB – 63A 1 Pole C Curve (WMC163C)
£1.84
£2.99
The WMC163C is a 63 A single-pole 6 kA Miniature Circuit Breaker (MCB) designed for large feed and distribution circuits where inrush currents from motors, welders or transformers demand higher tolerance. Its C-curve tripping profile (5–10 × In) provides robust inrush immunity while ensuring rapid...
6kA MCB – 63A 1 Pole B Curve (WMC163B)
£1.84
£2.99
The WMC163B is a 63 A single-pole 6 kA Miniature Circuit Breaker (MCB) built for high-load distribution circuits, feed boards and plant equipment. It delivers accurate overcurrent and short-circuit protection using a B-curve tripping profile (3–5 × In), providing fast disconnection on faults without nuisance...
What Is a 6kA MCB?
A 6kA MCB is a miniature circuit breaker that can safely interrupt fault currents up to 6,000 amps without damage. It protects circuits from overloads and short-circuits, and is the standard device used in most domestic consumer units.
Where 6kA MCBs Are Used
- Domestic consumer units in typical houses and flats
- Small offices and light commercial boards with moderate fault levels
- Lighting circuits including LED and traditional fittings
- Socket and ring main circuits
- General fixed appliances such as immersion heaters and small motors
B Curve vs C Curve 6kA MCBs
B Curve: Trips between 3–5 times rated current. Typically used for lighting, socket outlets and general resistive loads.
C Curve: Trips between 5–10 times rated current. Suitable for circuits with modest inrush currents, such as small motors or equipment with higher startup demand.
When 6kA Is the Right Choice
A 6kA MCB is appropriate where the calculated or measured prospective fault current at the point of installation does not exceed 6kA. This is the case for the vast majority of domestic properties and many small commercial installations.
- Standard domestic fault levels
- Consumer units fed from typical low-voltage networks
- Boards located away from the transformer or service head
Compliance & Standards
All 6kA MCBs in this category are designed to comply with BS EN 60898 and meet the performance expectations of the 18th Edition Wiring Regulations. They are suitable for new installations, upgrades and replacement work in standard fault-level environments.
Installer Benefits
6kA MCBs offer dependable protection and predictable tripping performance for everyday circuits. With a wide range of ratings and curves, they give electricians the flexibility to design safe, compliant boards without over-specifying devices where higher breaking capacities are not required.