3 Phase Surge Protection Device Unit with 8 Way Metal IP40 enclosure 40A MCB
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WMCUSP440C is a complete 3 phase...
Your basket
Loading your basket…
Prices exclude VAT. VAT, shipping and discounts are calculated at checkout.
3 phase consumer units and three phase distribution boards for commercial, industrial and larger domestic installations. Browse 3 phase boards, surge protection units, PME fault detection devices, main switches, MCBs, RCDs and supporting circuit protection for higher-load electrical systems.
This range is suited to installers working on three-phase supplies, EV charging infrastructure, solar PV systems, workshops, commercial buildings, plant rooms and distribution upgrades.
Quick answer: A 3 phase consumer unit or distribution board is used to split a three-phase supply into protected outgoing circuits for commercial, industrial or higher-load installations.
Common three-phase products include:
Choose products based on supply type, circuit count, current rating, protection requirements and installation environment.
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WMCUSP440C is a complete 3 phase...
The WCED WME3P40SP is a pre-assembled 3-phase surge protection unit housed in a durable steel enclosure – built to safeguard commercial, industrial, and EV...
The WFMS100 is a 100 A metal fuse switch with 22 × 58 fuseholder, designed for safe mains isolation and over-current protection between the...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping.The WARB5100C/PME is a 3 phase PME fault...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping.The WARB5100C/PME40RSP is a 3 phase PME fault...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WMCUSP463C is a ready-to-fit 3-Phase Surge...
The WFIS100 is a compact, insulated fused main switch rated at 100A AC21 - designed for safe isolation and protection of incoming supplies. Supplied...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping.The WARB5100C/PME40R is a 3 phase PME fault...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WRCUSP440C is a ready-to-fit 3-Phase Surge...
The WFMS100/3FSP is a 100A metal switch fuse isolator with SPD, supplied complete with a Type 2 Surge Protection Device and 63A, 80A and...
The WTPN12-125SP is a 12-way 125A three-phase distribution board designed for commercial and industrial installations that require a higher circuit count with room for...
Pre-wired in the UK and built to order – allow up to 3 working days for dispatch. The WARB5100C/PME63DRSP is the flagship 3 Phase...
A 3 phase consumer unit, three phase board or 3 phase distribution board distributes an incoming three-phase supply across protected outgoing circuits. These boards are typically used where electrical demand is higher than a standard single-phase installation can support.
Three-phase installations should be designed and installed in accordance with BS 7671 and the relevant product standards for the selected board and protective devices. The right specification depends on supply type, load demand, circuit protection, surge protection and isolation requirements.
Looking for accessories to complete your install? Explore our full range of Surge Protection Devices, PME Fault Detection Units, and Enclosures.
What is a 3 phase consumer unit used for?
A 3 phase consumer unit is used to distribute a three-phase electrical supply into multiple protected circuits, commonly in commercial buildings, workshops, plant rooms and higher-load installations.
Is a 3 phase consumer unit the same as a distribution board?
The terms are often used interchangeably. In practice, both refer to a board used to distribute and protect circuits from a three-phase supply.
Do 3 phase boards need surge protection?
Surge protection should be considered as part of the installation design. Many commercial and renewable installations use three-phase SPDs to help protect connected equipment.
Can 3 phase boards be used for EV or solar installs?
Yes. Three-phase boards are often used for commercial EV charging, solar PV, heat pumps and other higher-load renewable systems where the installation design requires them.
All products are UK-stocked and dispatched from our warehouse. Orders over £30 qualify for next-day delivery, with Saturday upgrades available. Need to return an item? See our returns policy. For tailored advice, contact our technical team.