- 01923 969309
- Sales@pandd.co.uk
Automatic 15% discount for all contractors on all orders over £100 excluding VAT
-
0
-
Your cart is currently empty.
-
The WER06B-030 is a 6A B Curve High Immunity Type A RCBO designed for circuits requiring combined overload, short-circuit and residual current protection in a single device. It is especially suitable for lighting circuits and other low inrush final circuits where a 6A protective device is appropriate.
Part of the Whitecliffe WER High Immunity RCBO range, this model provides Type A residual current protection for AC and pulsating DC leakage, along with double pole isolation and bi-directional wiring. Its high immunity design also helps reduce nuisance tripping in busy modern installations.
Installer Tip: A 6A B Curve RCBO is typically used on lighting and similar low inrush circuits. Where a circuit has a higher start-up characteristic, a 6A C Curve variant may be the better fit.
Key Features
- 6A B Curve Type A RCBO – overload and residual current protection combined
- High immunity design – helps resist nuisance tripping from transient disturbances
- 30mA sensitivity – suitable for additional protection applications
- 10kA breaking capacity – suitable for domestic and commercial distribution boards
- Double pole switching – disconnects live and neutral conductors
- Bi-directional supply – connection possible from top or bottom
- DIN rail mounting – suits standard consumer units and boards
- Type A protection – detects AC and pulsating DC residual currents
Compare High Immunity RCBOs
| Model | Rating | Curve | Typical Use |
|---|---|---|---|
| WER06B-030 (This Product) | 6A | B | Lighting and other low inrush final circuits |
| WER06C-030 | 6A | C | Low-rated circuits where higher inrush tolerance is preferred |
| WER16B-030 | 16A | B | General domestic final circuits with low inrush loads |
| WER16C-030 | 16A | C | Small motors and circuits with moderately higher inrush current |
| WER20B-030 | 20A | B | Domestic final circuits requiring a higher current rating |
| WER20C-030 | 20A | C | Circuits with moderately higher inrush current |
| WER32B-030 | 32A | B | Ring finals and other standard appliance circuits |
| WER32C-030 | 32A | C | Higher demand circuits and loads with greater inrush current |
| WER40B-030 | 40A | B | Higher load circuits with lower inrush characteristics |
| WER40C-030 | 40A | C | Heavier-duty circuits with higher inrush conditions |
| WER63C-030 | 63A | C | Larger commercial or high-load applications |
