A-Type RCBO EV Kit – 2 Way 10 A B Curve (WMEV210B)
18th Ed. Compliant
2-Year Warranty
UK Stock
Free Delivery £30+
Secure Payments With
The WMEV210B is a 2-way A-Type RCBO EV Kit fitted with a 10 A B-curve Type A RCBO, providing overload, short-circuit and earth-leakage protection for small single-phase EV circuits. With 30 mA AC + 6 mA DC detection, it meets 18th Edition Amendment 2 requirements for EV charging points. This...
The WMEV210B is a 2-way A-Type RCBO EV Kit fitted with a 10 A B-curve Type A RCBO, providing overload, short-circuit and earth-leakage protection for small single-phase EV circuits. With 30 mA AC + 6 mA DC detection, it meets 18th Edition Amendment 2 requirements for EV charging points.
This compact kit offers dual-pole isolation with clear fault indication for AC and DC leakage. Factory-assembled and ready to wire, it’s ideal for low-power chargers (3.6 kW / 16 A feed limited circuits) and retrofit upgrades needing dedicated RCD and MCB protection in one device.
Installer Tip: Select a 10 A B-curve variant for lower-rated EV chargers or circuits sharing a limited supply (e.g. load-managed setups). For higher draw or inrush currents, move up to 16 A or C-curve models.
- 10 A B-curve high-immunity RCBO (pre-fitted)
- 30 mA AC + 6 mA DC leakage detection – Type A compliant
- 1P + N switched neutral – full isolation of both conductors
- 2-way compact steel enclosure with hinged cover
- Meets BS EN 61009-1 and BS 7671 (A2)
- Built to resist nuisance tripping with EV chargers
| Part Code | Rating | Curve | Typical Use |
|---|---|---|---|
| WMEV206B | 6 A | B | Low-load EV control circuits |
| WMEV210B | 10 A | B | Small EV chargers / limited-supply circuits |
| WMEV216B | 16 A | B | Standard single-phase chargers (3.6 kW typ.) |
Every kit is factory-built and inspection-ready. For full PEN fault compliance and load balancing, combine with our PME Fault Detection Unit. Add a Single Module SPD for surge defence if required by specification.
Is this kit compliant for EV installations?
Yes – the Type A RCBO includes 30 mA AC + 6 mA DC protection to 18th Edition Amendment 2 standards.
When should I choose a 10 A B Curve model?
Use for smaller chargers or circuits with limited supply capacity. For 7 kW units or higher inrush loads, step up to 16 A or C-curve variants.
Does it switch both live and neutral?
Yes – the RCBO features a switched neutral for full isolation and safety during faults or maintenance.
Can I add surge protection?
Yes – fit a Single Module SPD upstream or within the board as required.
Is it suitable for solar PV as well as EV?
Yes – the Type A RCBO is bi-directional and can be used for both EV and PV systems.
- Part Code: WMEV210B
- Enclosure: 2-way compact steel with hinged lid
- Device: Type A RCBO (high immunity)
- Rated Current (In): 10 A
- Curve: B
- Earth Leakage: 30 mA AC + 6 mA DC
- Breaking Capacity: 6 kA
- Poles: 1P + N (switched neutral)
- Standards: BS EN 61009-1; BS 7671:2018 (A2)
- Typical Use: Smaller EV chargers or controlled supply feeds
The WMEV210B kit is supplied pre-wired for fast installation. All work must be completed by a qualified electrician to BS 7671 standards.
- Mount in a dry or sheltered location (IP-rated if outdoors)
- Select 10 A B-curve for low-to-medium power EV chargers
- Verify final connections and Zs readings against design values
- Install upstream SPD if required by site or manufacturer spec
