EV Consumer Units & Kits – EV Charger Ready
Power & Data supply fully compliant EV consumer units and kits, designed to meet 18th Edition Amendment 2 standards. Every board is pre-fitted with the protection devices you need for a safe, regulation-ready EV charger install – including Type 2 Surge Protection Devices (SPDs), RCBOs, and optional PEN fault detection. These EV-ready boards sit within our wider Consumer Units range.
Read more
Whether you’re fitting a domestic wallbox charger, setting up a weatherproof outdoor supply, or wiring a commercial multi-bay EV point, our kits are built to save you time on site. Units are available in IP65 enclosures for outdoor use, or compact boards ideal for garages and indoor installs.
- Amendment 2 ready – SPD, RCBO & RCD protection included
- Pre-wired kits – cut down on installation time
- Weatherproof options – IP65 units for outdoor charging points
- 2-year warranty – with full manufacturer support
Looking for integrated PME disconnection or hybrid compatibility with heat pumps and solar PV? Check our PME fault detection units.
See our delivery information or returns policy for full details.
EV Connection Unit – 100A Main Switch + Surge Protection + 40A MCB (WEVCU40BSP)
£34.19
The WEVCU40BSP is a pre-wired EV connection unit designed to provide local isolation, surge protection, and overcurrent protection for EV charge point circuits drawing up to 40A. Built into a compact 5-way IP40 metal enclosure, it includes a 100A double-pole main switch, Type 2 SPD,...
EV Connection Unit – 100A Main Switch + Surge Protection + 32A MCB (WEVCU32BSP)
£34.19
The WEVCU32BSP is a fully pre-wired EV connection unit combining surge protection, overload protection, and isolation inside a compact 5-module IP40-rated metal enclosure. Fitted with a 100A double-pole main switch, Type 2 SPD, and 32A MCB, it provides a ready-to-fit solution for EV charge point...
4 Way Metal EV Protection Unit – 32A C Curve A-Type RCBO + SPD (WMRC32CSP)
£31.90
The WMRC32CSP is a 4 Way Metal EV Protection Unit equipped with a 32 A C-Curve A-Type RCBO and Type 2 SPD inside a robust steel housing. Designed for commercial and higher inrush EV charger applications, it delivers overload, earth-leakage, and surge protection in one...
4 Way Metal EV Protection Unit – 40A C Curve A-Type RCBO + SPD (WMRC40CSP)
£31.90
The WMRC40CSP is a 4 Way Metal EV Protection Unit that combines a 40 A C-Curve A-Type RCBO with a Type 2 SPD inside a durable, powder-coated steel housing. Built for EV charger installations with higher inrush or inductive loads, it delivers overload, earth-leakage, and...
8 Way IP65 EV Connection Unit with Surge Protection – 40A MCB (WPEVCU40BSP/8)
£43.55
The WPEVCU40BSP/8 is an 8 Way IP65 EV Connection Unit with Surge Protection designed for higher-load EV charger installations requiring dependable isolation and transient voltage protection. Built to order and supplied preassembled, it combines a 100A main switch isolator, 40A MCB, and Type 2 SPD...
Choosing the Right EV Consumer Unit
Not all EV installs are the same – the right consumer unit depends on the charger type, location, and earthing arrangement. Our EV kits are designed to cover every scenario while keeping your installs compliant and future-proof.
Key Considerations
- SPD protection – now a requirement under BS 7671 for EV circuits.
- PEN fault detection – essential for PME supplies where earth rods aren’t used.
- RCD/RCBO type – Type A or Type B devices depending on charger specification.
- IP rating – IP65 enclosures for outdoor or weather-exposed installs.
- Size – from mini 2-way garage boards to larger multi-way setups.
Featured EV Kits
- A-Type RCBO EV Protection Unit + Surge Protection – a compact all-in-one solution for domestic wallbox installs.
- IP65 EV Connection Unit with SPD – weatherproof protection for outdoor points.
- IP65 PEN Fault Detection Unit – PME-compliant kit with built-in disconnection safety.
- 8-Way IP65 EV Connection Unit – scalable option for commercial or multi-bay setups.
Trust & Compliance
Every EV consumer unit we supply is BS EN certified, tested for reliability, and shipped from our UK warehouse. With next-day delivery available and a 2-year manufacturer warranty, installers can fit with confidence knowing they’re backed by full compliance and support. If you need to return an item, see our returns policy.
FAQs
Do I need a dedicated consumer unit for an EV charger?
Yes. The 18th Edition requires a dedicated supply with surge protection and RCD/RCBO protection – a standard house board won’t meet these requirements.
Which RCD type do I need?
Most chargers are fine with Type A, but some models with DC leakage risk require Type B. Always check manufacturer documentation before ordering.
What if my property uses PME earthing?
You’ll need an EV unit with PEN fault detection. We stock fully compliant PME units designed to disconnect supply safely in the event of a fault.
Related Categories
- EV Surge Protection Boards
- PME Fault Detection Units
- Heat Pump Consumer Units
- Surge Protection Devices (SPDs)
Need help matching the right kit to your charger? Contact our technical team for expert advice before you buy.