EV Consumer Units for EV Charger Installations
EV consumer units provide a dedicated, regulation-compliant supply for electric vehicle chargers. Under BS 7671 (18th Edition Amendment 2), EV circuits must include surge protection, appropriate RCD/RCBO protection, and – where required – PEN fault disconnection. Our EV charging consumer units are pre-configured to meet these requirements.
Quick answer: An EV charger requires its own dedicated consumer unit with SPD protection and the correct RCD/RCBO type. Standard house boards are not compliant for new EV installations.
Read more
Each EV kit includes the core protection required for safe charging:
- Type 2 Surge Protection Device (SPD) – mandatory for EV circuits
- Type A or Type B RCBO – depending on charger DC leakage requirements
- PEN fault detection (PME protection) where earthing conditions require disconnection
- IP65 outdoor options for weather-exposed installs
Whether you are installing a domestic wallbox, a garage charger, or a commercial multi-bay system, these EV distribution units are built to simplify compliance and reduce time on site.
See our delivery information or returns policy for full details.
IP65 EV Consumer Unit – 32A C Curve RCBO + SPD
£56.90
The WMIP32CSP is an IP65-rated EV consumer unit pre-fitted with a 32A Type A RCBO (C Curve) and integrated Type 2 SPD. Built for EV charger installations where higher inrush currents are expected, this unit provides compliant overcurrent, earth leakage, and surge protection in a...
IP65 EV Consumer Unit – 40A B Curve RCBO + SPD
£56.90
The WMIP40BSP is a heavy-duty IP65 EV consumer unit fitted with a 40A Type A RCBO (B Curve) and integrated Type 2 SPD. Designed for EV charger installations with higher current demand, it delivers full overcurrent, earth leakage, and surge protection in a lockable metal...
IP65 EV Consumer Unit – 32A B Curve RCBO + SPD
£56.90
The WMIP32BSP is a weatherproof IP65 EV consumer unit pre-fitted with a 32A Type A RCBO (B Curve) and integrated Type 2 Surge Protection Device (SPD). Designed for domestic and commercial EV charger installs, it provides full overcurrent, earth leakage, and surge protection in one...
High Immunity Type A Mini RCBO – 40A C Curve (WRB140C-030)
£11.67
The WRB140C-030 High Immunity Type A Mini RCBO is a 40A C Curve protective device designed for circuits with motors, pumps, and equipment that draw higher inrush currents. At just 18mm wide, it combines overload, short-circuit, and residual current protection in one compact unit. With...
WERM6332 EV Connection Unit
£32.06
The WERM6332 EV Connection Unit is a compact protection and isolation solution for EV charging points and small renewable (PV) installs. Combining a 63A A-Type RCD, 32A MCB, and 100A main switch, it ensures safe, compliant operation while protecting circuits from overloads, faults, and residual...
What Is an EV Consumer Unit?
An EV consumer unit (sometimes called an EV charging board or EV charger fuse box) is a dedicated distribution board designed specifically for electric vehicle charging circuits. It separates the EV load from the main house installation and provides the additional protection required under modern wiring regulations.
Why a Dedicated EV Charging Consumer Unit Is Required
- EV chargers draw sustained high loads
- Inverter-based charging can produce DC leakage
- Surge protection is required under BS 7671
- PME earthing may require PEN fault detection
Installing a standard split-load board will not meet current EV compliance requirements.
Key Protection Components Inside an EV Kit
- Surge Protection (SPD) – protects charger electronics from voltage spikes
- RCBO protection – overload and earth leakage in one device
- Type B RCD where required – for DC-sensitive chargers
- PEN fault detection – essential for PME supplies without earth rods
Domestic vs Commercial EV Distribution Units
- Domestic installs – compact 2–4 way boards for single wallbox chargers
- Garage installs – IP-rated enclosures for outbuildings
- Commercial charging – higher-capacity boards for multi-bay systems
- Outdoor setups – IP65 weatherproof EV charging enclosures
EV Charger RCD Type Explained
Most EV chargers are compatible with Type A RCBOs. However, chargers without built-in DC monitoring require Type B RCD protection. Always check the manufacturer’s installation guide before selecting the device.
Compliance & Standards
All EV consumer units supplied by Power & Data UK comply with BS EN 61439-3 and are designed to meet the requirements of BS 7671 (18th Edition Amendment 2). Devices are UK stocked and backed by manufacturer warranty.
Related EV Protection Categories
Need help choosing the correct EV charging consumer unit? Contact our technical team for guidance before ordering.