Your basket
Loading your basket…
Prices exclude VAT. VAT, shipping and discounts are calculated at checkout.
Shop circuit protection devices for domestic, commercial and specialist installations, including MCBs, RCDs, RCBOs and surge protection. Use the filters to narrow the range by device type, rating and application.
Device selection depends on the circuit design, load characteristics, prospective fault current, required residual-current response and the equipment manufacturer’s instructions.
Quick guide: MCBs provide overcurrent protection; RCDs respond to residual current; RCBOs combine both functions for individual circuits. RCD type, trip curve, current rating and breaking capacity must be selected for the installation.
The WME06-SOL is a factory-assembled solar consumer unit designed for domestic single-phase solar PV installations. Built into a compact 6-way enclosure, it combines protection and...
The WPPV-1S1 is an IP65 plastic solar string combiner box designed for single-string PV installations requiring integrated DC isolation and surge protection. Rated for...
The WPPV-2S2 is an IP65 plastic solar string combiner box designed for two-string PV installations requiring integrated DC isolation and surge protection. Rated for...
The WMPV-1S1 is an IP65 metal solar string combiner box designed for single-string solar PV installations requiring enhanced enclosure durability. Rated for 1000V DC...
The WMPV-2S2 is an IP65 metal solar string combiner box designed for dual-string solar PV systems operating up to 1000V DC. It provides safe...
The WME10/SOL1 10 Way Solar Consumer Unit is a factory-assembled solution for domestic solar PV installations. It combines a 20A RCBO, 32A rotary isolator...
The WRT320C-030 is a 3-pole Type A RCBO combining residual current protection and overcurrent protection in a compact 3-module device. Rated at 20A with...
The WRT332C-030 is a 3-pole Type A RCBO designed to provide combined residual current and overcurrent protection for three-phase installations. Rated at 32A with...
The WRT340C-030 is a 3-pole Type A RCBO providing combined residual current and overcurrent protection for three-phase circuits rated up to 40A. With a...
The WRT340B-030 is a 3-pole Type A RCBO designed for three-phase circuits requiring combined residual current and overcurrent protection at a 40A rated current....
The WRT350C-030 is a 3-pole Type A RCBO designed for higher-current three-phase circuits requiring combined residual current and overcurrent protection. Rated at 50A with...
The WME18/MS100 Main Switch Consumer Unit is a 18-module metal enclosure supplied with a 100A main switch incomer. Offering 16 usable ways, it’s ideal...
Start with the circuit design and connected equipment—not a device label in isolation. The protective device must suit the load, conductor capacity, earthing arrangement, prospective fault current and any residual-current characteristics identified by the equipment manufacturer. Installation and verification should be completed by a competent electrical professional to the applicable edition of BS 7671.
Miniature circuit breakers provide protection against overload and short-circuit current. Select the current rating, trip curve and breaking capacity from the installation design and load characteristics.
Residual current devices disconnect when the monitored current imbalance reaches their operating threshold. The correct type and sensitivity depend on the application and expected residual-current waveform.
RCBOs combine overcurrent and residual-current protection in one device. Per-circuit protection can improve fault discrimination and limit disruption elsewhere in the installation.
Surge ProtectionHigh Immunity RCBOsType B RCDsArc Fault DetectionElectrical Enclosures
Trade support: UK-stocked products, manufacturer-backed specifications and fast dispatch. Check each product page for standards, ratings, stock status and delivery details before ordering.
$132.00 ex VAT
VAT: Product prices exclude VAT. VAT is added at checkout.
