Forward orders accepted
4 Way Metal EV Protection Unit – 32A B Curve A-Type RCBO + SPD
£34.90 ex. VAT
£41.88 inc. VAT
Empty IP65 Plastic Enclosure – 8 Usable Ways
£17.30
ex VAT
£20.76 inc VATWas £31.72 ex VAT
SKU: WHA865
Forward orders accepted — ask us for the current lead time
Ask us about availability
Currently unavailable
The WHA865 is a robust IP65-rated plastic enclosure designed for weatherproof electrical installations where moisture or dust protection is critical. With 8 usable DIN ways, it’s ideal for EV chargers, garden distribution, garages, and small outbuildings. Each unit includes Earth and Neutral bars for quick termination and neat internal wiring....
Read full descriptionAccepted payment methods
Description
The WHA865 is a robust IP65-rated plastic enclosure designed for weatherproof electrical installations where moisture or dust protection is critical. With 8 usable DIN ways, it’s ideal for EV chargers, garden distribution, garages, and small outbuildings.
Each unit includes Earth and Neutral bars for quick termination and neat internal wiring. The UV-stabilised housing resists cracking and deformation, while the clear front cover allows easy circuit identification once devices are fitted.
Installer Tip: The 8-way WHA865 is a great mid-size enclosure for outdoor EV installations where extra space is needed for surge devices or dual RCBO setups. Always leave adequate space for cable bending radius and neutral link routing.
- IP65-rated for outdoor and indoor use
- Supplied with Earth & Neutral bars and mounting fixings
- Compatible with standard MCBs, RCBOs, and SPDs
- UV-stabilised, weatherproof plastic housing
- Meets BS EN 61439 and 18th Edition Amendment 2 requirements
Available Variants:
| Part Code | Description | Dimensions (W × H × D mm) |
|---|---|---|
| WHA465 | 4-way IP65 plastic enclosure | 140 × 205 × 95 |
| WHA865 | 8-way IP65 plastic enclosure | 212 × 205 × 95 |
| WHA1265 | 12-way IP65 plastic enclosure | 295 × 255 × 140 |
For pre-built options with surge protection and RCBOs installed, explore our EV-Ready Consumer Units.
Technical specs
- Part Code: WHA865
- Rating: IP65 – weatherproof and dust-tight
- Material: Durable UV-stabilised plastic
- Configuration: 8 usable DIN ways
- Bars Supplied: Earth & Neutral
- Mounting: Surface mount, wall fix
- Use: Indoor or outdoor applications
- Dimensions (W × H × D): 212 × 205 × 95 mm
- Compliance: BS EN 61439, IEC 60529
Installation notes
This enclosure is suitable for both new installs and retrofit applications. Always install in line with BS 7671 and manufacturer guidance.
- Securely mount on a stable, vertical surface
- Seal all gland entries to maintain IP65 rating
- Verify device clearance when fitting RCBOs or SPDs
- Use the supplied Earth & Neutral bars with correct torque
- Keep SPD earth leads as short as possible for optimal protection
FAQs
Is the WHA865 enclosure waterproof?
Yes – the IP65 rating ensures full protection against dust and low-pressure water jets, suitable for outdoor use in EV or garage applications.
Can I use this with RCBOs and surge devices?
Yes, the 8-way design provides sufficient space for RCBOs and a single Type 2 SPD. For larger builds, consider the 12-way version.
Does it come pre-populated?
No – it’s supplied empty with Earth and Neutral bars only. Fit your preferred MCBs or RCBOs as required.
Is this enclosure suitable for EV chargers?
Yes, it’s widely used for EV charger distribution points, offering enough space for PEN fault, SPD, and RCBO combinations. See our EV Kits for ready-wired alternatives.
What’s included?
Includes enclosure body, cover, Earth & Neutral bars, and mounting fixings.
