CATEGORIES

A-Type RCBO EV Kit – 2 Way 25 A C Curve (WMEV225C)

£28.34 ex VAT £34.01 inc VAT

The WMEV225C is a 2-way A-Type RCBO EV Kit fitted with a 25 A C-curve high-immunity Type A RCBO. It provides combined overload, short-circuit and earth-leakage protection (30 mA AC + 6 mA DC) in full compliance with 18th Edition Amendment 2. Perfect for 5–6 kW EV chargers or light...

Read full description

Accepted payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
Description

The WMEV225C is a 2-way A-Type RCBO EV Kit fitted with a 25 A C-curve high-immunity Type A RCBO. It provides combined overload, short-circuit and earth-leakage protection (30 mA AC + 6 mA DC) in full compliance with 18th Edition Amendment 2.

Perfect for 5–6 kW EV chargers or light commercial feeds, this variant handles moderate inrush currents without nuisance tripping. Pre-assembled in a compact 2-way steel enclosure with dual-pole isolation and clear fault indication, it’s ready for rapid, regulation-ready installation.

Installer Tip: Use a 25 A C-curve when charging loads draw 5–6 kW or include transformer/inverter input stages with brief startup surges. For standard domestic 7 kW chargers, step up to the 32 A variant.

  • 25 A C-curve Type A RCBO (30 mA AC + 6 mA DC detection)
  • Dual-pole (1P + N) isolation – disconnects live and neutral
  • Compact 2-way steel enclosure with hinged lid
  • High-immunity Type A design minimises false trips on EV loads
  • Complies with BS EN 61009-1 and BS 7671 (A2)
Part Code Rating Curve Typical Use
WMEV220C 20 A C 4–5 kW chargers / light domestic circuits
WMEV225C 25 A C 5–6 kW chargers / light commercial feeds
WMEV232C 32 A C 7 kW EV chargers / dedicated radials

Each kit is pre-built and inspection-ready. For PEN fault and load-balancing compliance, pair with our PME Fault Detection Unit. Add a Single Module SPD for surge protection where required.

Technical specs
  • Part Code: WMEV225C
  • Enclosure: 2-way steel with hinged lid
  • Device: Type A RCBO (high immunity)
  • Rated Current (In): 25 A
  • Curve: C
  • Earth Leakage: 30 mA AC + 6 mA DC
  • Breaking Capacity: 6 kA
  • Poles: 1P + N (switched neutral)
  • Standards: BS EN 61009-1; BS 7671:2018 (A2)
  • Typical Use: 5–6 kW chargers / light commercial EV circuits with inrush current
Installation notes

The WMEV225C kit is supplied pre-assembled for fast fit-out. Installation and testing must be carried out by a qualified electrician.

  • Mount indoors or in an IP-rated location if external
  • Select 25 A C-curve for 5–6 kW chargers or small commercial feeds
  • Verify Zs, R1 + R2 and disconnection times to BS 7671 (A2)
  • Install upstream SPD if required by site spec or manufacturer
FAQs

When should I use the 25 A C Curve variant?

Choose it for 5–6 kW chargers or small commercial circuits that see brief startup surges from transformers or motors.

Is this kit 18th Edition compliant?

Yes – it includes a Type A RCBO with 30 mA AC + 6 mA DC detection to BS 7671 (A2).

Does it isolate both live and neutral?

Yes – the 1P + N RCBO provides full dual-pole isolation for safety and maintenance.

Can I add surge protection?

Yes – fit a Single Module SPD or install upstream protection as required.

Is it suitable for solar PV as well as EV circuits?

Yes – the bi-directional Type A RCBO is approved for EV and solar PV systems.

Reviews

Power & Data UK

Why buy from Power & Data?

  • Electrical ranges in one place

    Consumer units, circuit protection and ranges for renewable installations.

    Explore the range
  • Speak to P&D

    Have a question before you order? Call our sales team.

    01923 969 309
  • Secure checkout

    Choose from the payment methods available at checkout, with your order total shown before you pay.