IP40 Metal Garage Consumer Unit – 63A RCD + 6A / 16A MCBs
£33.32 ex. VAT
Was £64.33 ex. VAT
£39.98 inc. VAT
6 Module Heat Pump Consumer Unit – 32A C Curve Type B HP RCBO + SPD (WME06/HP32C)
£239.75
ex VAT
£287.70 inc VAT
SKU: WME06/HP32C
Forward orders accepted — ask us for the current lead time
Ask us about availability
Currently unavailable
Built to order — allow five working days after your order is received. 32A Type B HP heat pump protection in a compact surge-protected board The WME06/HP32C is a six-module heat pump consumer unit based on the WME06/SP enclosure, with a 100A main switch, Type 2 surge protection and a...
Read full descriptionAccepted payment methods
Description
Built to order — allow five working days after your order is received.
32A Type B HP heat pump protection in a compact surge-protected board
The WME06/HP32C is a six-module heat pump consumer unit based on the WME06/SP enclosure, with a 100A main switch, Type 2 surge protection and a listed 32A C-curve Type B HP RCBO. Designed for installations where the electrical specification calls for this device rating and protection type.
32A
C-curve Type B HP RCBO
100A
Main switch listed
Type 2
Surge protection included
Compare heat pump RCBO ratings
Available product options: 16A, 20A, 25A and 32A C-curve. Choose the rating specified by the electrical design and heat pump manufacturer; these are not interchangeable without checking the installation requirements.
Check the specified heat pump protection
Whitecliffe's WHR1 heat pump RCBO family is designed for smooth DC residual-current detection and high-frequency leakage conditions associated with some inverter-driven heat pumps. This listing identifies a 32A C-curve Type B HP RCBO; check the equipment manufacturer's requirements for current rating, residual-current type and circuit design. The supplied WHR1 datasheet lists B-curve part-code examples; the corresponding C-curve part code appears in the P&D catalogue and needs confirmation against the current manufacturer part list.
Current listed configuration
- Base enclosure: WME06/SP six-module metal unit with 100A main switch and Type 2 SPD
- Heat pump protection: 1 × WHR132C-030, 32A C curve, Type B HP, 1P+N, 30mA, 10kA (listed component; exact manufacturer reference awaiting confirmation)
- Additional devices: the initial product information lists two Type A RCBOs alongside the heat pump RCBO. Their exact ratings, curves and part codes require confirmation from P&D before being specified here.
- Busbar: inclusion and exact specification awaiting P&D technical confirmation
Space and circuit planning
The underlying WME06/SP base board provides three usable outgoing ways. The presently listed combination of one single-module Type B HP RCBO and two additional single-module RCBOs would occupy those three ways, subject to technical confirmation of the final build. Do not rely on the previous five-usable-way claim.
Technical note: the attached WHR1 manufacturer sheet describes the RCBO family, not the completed WME06/HP assembly. Component quantities, precise part references and busbar inclusion require final confirmation by Power & Data before this listing can be treated as fully verified.
Technical specs
| Product code | WME06/HP32C |
|---|---|
| Base enclosure | WME06/SP metal enclosure — 6 modules |
| Base enclosure outgoing capacity | 3 usable outgoing ways |
| Main switch | 100A |
| Surge protection | Type 2 SPD |
| Listed heat pump RCBO | 32A C curve, Type B HP, 30mA, 1P+N, 10kA; exact manufacturer part reference to be confirmed |
| Other outgoing devices | Quantities, curves, ratings and part numbers awaiting technical confirmation |
| Busbar | Inclusion and part number awaiting technical confirmation |
| Lead time | Built to order — allow five working days after receipt of order |
Installation notes
WME06/HP32C — installation notes
- Based on the six-module WME06/SP enclosure, incorporating a 100A main switch and Type 2 SPD.
- Check the required 32A C-curve Type B HP RCBO against the heat pump manufacturer's instructions and electrical design.
- The base enclosure has three usable outgoing ways; confirm the final populated circuit schedule and protective-device coordination.
- Final installation and testing must be carried out by a competent electrician.
- The ratings and part codes of auxiliary devices and any busbar are awaiting technical confirmation from Power & Data.
FAQs
What does the WME06/HP32C include?
The listing describes a six-module WME06/SP enclosure with a 100A main switch, Type 2 SPD and a 32A C-curve Type B HP heat pump RCBO. The full fitted-device schedule is awaiting technical confirmation.
How is Type B HP different from C curve?
Type B HP describes the residual-current detection characteristic, while C curve describes the device's overcurrent tripping characteristic.
How many outgoing ways does the base board have?
The WME06/SP base enclosure provides three usable outgoing ways. The fitted devices determine how many remain available.
Are two additional RCBOs and a busbar supplied?
The original product information mentions additional RCBOs and a busbar, but their exact specifications and inclusion have not yet been confirmed by Power & Data's technical team. Confirm the bill of materials before ordering.
Is it suitable for my heat pump?
Check the required current rating, protective-device type and circuit configuration against the heat pump manufacturer's instructions and the installation design.
How long is the lead time?
Built to order — allow five working days after your order is received.
