- 01923 969309
- Sales@pandd.co.uk
Automatic 15% discount for all contractors on all orders over £100 excluding VAT
-
0
-
Your cart is currently empty.
-
The WMEV210B is a 2-way A-Type RCBO EV Kit fitted with a 10 A B-curve Type A RCBO, providing overload, short-circuit and earth-leakage protection for small single-phase EV circuits. With 30 mA AC + 6 mA DC detection, it meets 18th Edition Amendment 2 requirements for EV charging points.
This compact kit offers dual-pole isolation with clear fault indication for AC and DC leakage. Factory-assembled and ready to wire, it’s ideal for low-power chargers (3.6 kW / 16 A feed limited circuits) and retrofit upgrades needing dedicated RCD and MCB protection in one device.
Installer Tip: Select a 10 A B-curve variant for lower-rated EV chargers or circuits sharing a limited supply (e.g. load-managed setups). For higher draw or inrush currents, move up to 16 A or C-curve models.
- 10 A B-curve high-immunity RCBO (pre-fitted)
- 30 mA AC + 6 mA DC leakage detection – Type A compliant
- 1P + N switched neutral – full isolation of both conductors
- 2-way compact steel enclosure with hinged cover
- Meets BS EN 61009-1 and BS 7671 (A2)
- Built to resist nuisance tripping with EV chargers
| Part Code | Rating | Curve | Typical Use |
|---|---|---|---|
| WMEV206B | 6 A | B | Low-load EV control circuits |
| WMEV210B | 10 A | B | Small EV chargers / limited-supply circuits |
| WMEV216B | 16 A | B | Standard single-phase chargers (3.6 kW typ.) |
Every kit is factory-built and inspection-ready. For full PEN fault compliance and load balancing, combine with our PME Fault Detection Unit. Add a Single Module SPD for surge defence if required by specification.
