EV Consumer Units & Kits – EV Charger Ready
Power & Data supply fully compliant EV consumer units and kits, designed to meet 18th Edition Amendment 2 standards. Every board is pre-fitted with the protection devices you need for a safe, regulation-ready EV charger install – including Type 2 Surge Protection Devices (SPDs), RCBOs, and optional PEN fault detection. These EV-ready boards sit within our wider Consumer Units range.
Read more
Whether you’re fitting a domestic wallbox charger, setting up a weatherproof outdoor supply, or wiring a commercial multi-bay EV point, our kits are built to save you time on site. Units are available in IP65 enclosures for outdoor use, or compact boards ideal for garages and indoor installs.
- Amendment 2 ready – SPD, RCBO & RCD protection included
- Pre-wired kits – cut down on installation time
- Weatherproof options – IP65 units for outdoor charging points
- 2-year warranty – with full manufacturer support
Looking for integrated PME disconnection or hybrid compatibility with heat pumps and solar PV? Check our PME fault detection units.
See our delivery information or returns policy for full details.
EV Connection Unit 3 Way Metal Enclosure with 100A Main Switch & 32A MCB - WEVCU
£24.68
The WCED EV Connection Unit is a compact 3-way IP40 metal enclosure designed for safe isolation and circuit protection of electric vehicle (EV) charging points. It comes factory-fitted with a 100A double-pole main switch for isolation, alongside your choice of 32A or 40A MCB to...
High Immunity Type A Mini RCBO – 40A B Curve (WRB140B-030)
£11.67
The WRB140B-030 High Immunity Type A Mini RCBO is a 40A B Curve protective device for residential and commercial circuits requiring higher current handling. At just 18mm wide, it combines overload, short-circuit, and residual current protection in a single compact module. With 30mA Type A...
3 Way EV RCBO Enclosure – Type A High Immunity 32A Type B (WMEV332B)
£27.50
The WMEV332B is a compact 3-way EV RCBO enclosure designed to provide both earth leakage and overload protection for single-phase EV charging circuits. Fitted with a 32A Type A High Immunity RCBO (Type B curve), it offers full compliance with BS 7671:2018 Amendment 2 and...
WEV Electric Vehicle Kit - 63A RCD plus 40A C MCB
£132.00
The WEVKIT63 is a pre-built EV protection kit featuring a 63A B-Type RCD and a 40A Type C MCB – designed to meet the latest EV charger requirements, including protection against smooth DC earth leakage. It's a ready-to-fit solution for installers working with Tesla chargers...
4 Way Metal EV Protection Unit – 40A B Curve A-Type RCBO + SPD (WMRC40BSP)
£31.90
The WMRC40BSP is a 4 Way Metal EV Protection Unit combining a 40 A B-Curve A-Type RCBO and Type 2 Surge Protection Device inside a compact steel enclosure. Designed for higher-load EV charger circuits, it delivers overload, earth-leakage, and transient surge protection in one pre-wired,...
Choosing the Right EV Consumer Unit
Not all EV installs are the same – the right consumer unit depends on the charger type, location, and earthing arrangement. Our EV kits are designed to cover every scenario while keeping your installs compliant and future-proof.
Key Considerations
- SPD protection – now a requirement under BS 7671 for EV circuits.
- PEN fault detection – essential for PME supplies where earth rods aren’t used.
- RCD/RCBO type – Type A or Type B devices depending on charger specification.
- IP rating – IP65 enclosures for outdoor or weather-exposed installs.
- Size – from mini 2-way garage boards to larger multi-way setups.
Featured EV Kits
- A-Type RCBO EV Protection Unit + Surge Protection – a compact all-in-one solution for domestic wallbox installs.
- IP65 EV Connection Unit with SPD – weatherproof protection for outdoor points.
- IP65 PEN Fault Detection Unit – PME-compliant kit with built-in disconnection safety.
- 8-Way IP65 EV Connection Unit – scalable option for commercial or multi-bay setups.
Trust & Compliance
Every EV consumer unit we supply is BS EN certified, tested for reliability, and shipped from our UK warehouse. With next-day delivery available and a 2-year manufacturer warranty, installers can fit with confidence knowing they’re backed by full compliance and support. If you need to return an item, see our returns policy.
FAQs
Do I need a dedicated consumer unit for an EV charger?
Yes. The 18th Edition requires a dedicated supply with surge protection and RCD/RCBO protection – a standard house board won’t meet these requirements.
Which RCD type do I need?
Most chargers are fine with Type A, but some models with DC leakage risk require Type B. Always check manufacturer documentation before ordering.
What if my property uses PME earthing?
You’ll need an EV unit with PEN fault detection. We stock fully compliant PME units designed to disconnect supply safely in the event of a fault.
Related Categories
- EV Surge Protection Boards
- PME Fault Detection Units
- Heat Pump Consumer Units
- Surge Protection Devices (SPDs)
Need help matching the right kit to your charger? Contact our technical team for expert advice before you buy.