Your basket
Loading your basket…
Prices exclude VAT. VAT, shipping and discounts are calculated at checkout.
Shop consumer units for domestic, commercial and specialist circuits, including compact 4-way boards, larger distribution boards, garage units and dedicated EV or heat pump consumer units.
Choose the board around the number of outgoing circuits, spare capacity, enclosure location and the protective devices required by the installation design.
Quick guide: Allow enough usable ways for the immediate circuit schedule plus sensible spare capacity. Confirm the main switch, RCD or RCBO layout, surge-protection arrangement and enclosure suitability before ordering.
RCBO Consumer Unit Boards with 100A Main Switch & Twin RCDs. These Twin RCD metal consumer units are built for domestic and light commercial...
The WME2280TR/SP is a 22-module metal twin RCD consumer unit with a 100A main switch, two 80A, 30mA Type AC RCDs and a Type...
The WME2280TR is a 22-module metal twin RCD consumer unit with a 100A main switch, two 80A RCDs. It provides 16 usable ways for...
The WME22100TR is a 22-module metal twin RCD consumer unit with a 100A main switch, two 100A RCDs. It provides 16 usable ways for...
The WME1880TR/SP Twin RCD Metal Consumer Unit is an 18-module split-load board supplied with a 100A main switch, two 80A RCDs, and a factory-fitted...
RCBO Consumer Unit Boards with 100A Main Switch & Twin RCDs. These Twin RCD metal consumer units are built for domestic and light commercial...
The WME18100TR Twin RCD Metal Consumer Unit is an 18-module split-load board designed for larger domestic and light commercial installs. Fitted with a 100A...
The WME1663TR Twin RCD Metal Consumer Unit is a 16-module split-load board built for domestic and light commercial installs where RCD separation and Amendment...
The WME1463TR Twin RCD Metal Consumer Unit is a 14-module split-load board designed for domestic and light commercial installs where compliance, RCD separation, and inspection...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WMTP36-R40CSP is a complete 3 phase...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping. The WMTP28-R40CSP is a complete 3 phase...
The WMEPME10/SP is a metal PME fault detection consumer unit that WCED lists as a 40A C Curve model with a kWh meter. Energy...
Start with a documented circuit schedule. The board needs sufficient usable ways, compatible protective devices, an appropriate enclosure and room for the selected main switch, RCBOs, RCDs or SPDs. Installation design, assembly compatibility and manufacturer instructions remain decisive.
Count every outgoing circuit and allow practical spare capacity for foreseeable additions. Compact boards suit defined loads; larger homes and commercial installations often need more ways.
Main-switch, split-load and RCBO arrangements behave differently during a fault. Match the layout to the required circuit separation, residual-current protection and continuity needs.
Consider the mounting position, accessibility, environmental exposure and cable-entry requirements. Garage and outdoor locations may need a different enclosure from an indoor domestic board.
Metal Consumer UnitsGarage UnitsEV Consumer UnitsHeat Pump BoardsSurge Protection
Trade selection: check each product page for included devices, usable ways, ratings, standards, dimensions and current stock before ordering.
$132.00 ex VAT
VAT: Product prices exclude VAT. VAT is added at checkout.
