Your basket
Loading your basket…
Prices exclude VAT. VAT, shipping and discounts are calculated at checkout.
Shop consumer units for domestic, commercial and specialist circuits, including compact 4-way boards, larger distribution boards, garage units and dedicated EV or heat pump consumer units.
Choose the board around the number of outgoing circuits, spare capacity, enclosure location and the protective devices required by the installation design.
Quick guide: Allow enough usable ways for the immediate circuit schedule plus sensible spare capacity. Confirm the main switch, RCD or RCBO layout, surge-protection arrangement and enclosure suitability before ordering.
The WMEPME12/LBK is a metal PME consumer unit listed with an RCBO, load balancing and kWh energy metering. It is a configuration option for...
Pre-wired in the UK and tested before dispatch – allow up to 3 working days for shipping.The WPKPME08/C40 is an IP65 PME consumer unit...
The WME16/MS100 Main Switch Consumer Unit is a 16-module metal enclosure supplied with a 100A main switch incomer. With 14 usable ways, it provides...
The WME06/MS100 Main Switch Consumer Unit is a compact 6-module metal enclosure supplied with a 100A main switch incomer. It provides 4 usable ways,...
The 8 Way Consumer Unit with main switch incomer is a robust steel distribution board designed for small to medium domestic and commercial installs....
The 4 Usable Way Consumer Unit is a compact steel distribution board designed for small domestic installs, garages, and outbuildings. Built to order and...
The WME06-SOL is a factory-assembled solar consumer unit designed for domestic single-phase solar PV installations. Built into a compact 6-way enclosure, it combines protection and...
The WME18/SPH is an 18 way heat pump consumer unit with 12 spare ways, designed for high-capacity domestic installations where future expansion is expected....
The WME16/SPH is a 16 way heat pump consumer unit with 10 spare ways, designed for larger domestic installations where future expansion is expected....
The WME14/SPH is a 14 way heat pump consumer unit with 8 spare ways, designed for domestic installations where future expansion is expected. It...
The WME10/SOL1 10 Way Solar Consumer Unit is a factory-assembled solution for domestic solar PV installations. It combines a 20A RCBO, 32A rotary isolator...
The WME22100TR/SP is a 22-module metal twin RCD consumer unit with a 100A main switch, two 100A, 30mA Type A RCDs and a Type...
Start with a documented circuit schedule. The board needs sufficient usable ways, compatible protective devices, an appropriate enclosure and room for the selected main switch, RCBOs, RCDs or SPDs. Installation design, assembly compatibility and manufacturer instructions remain decisive.
Count every outgoing circuit and allow practical spare capacity for foreseeable additions. Compact boards suit defined loads; larger homes and commercial installations often need more ways.
Main-switch, split-load and RCBO arrangements behave differently during a fault. Match the layout to the required circuit separation, residual-current protection and continuity needs.
Consider the mounting position, accessibility, environmental exposure and cable-entry requirements. Garage and outdoor locations may need a different enclosure from an indoor domestic board.
Metal Consumer UnitsGarage UnitsEV Consumer UnitsHeat Pump BoardsSurge Protection
Trade selection: check each product page for included devices, usable ways, ratings, standards, dimensions and current stock before ordering.
$132.00 ex VAT
VAT: Product prices exclude VAT. VAT is added at checkout.
