10A 4 Pole 10kA MCB C Curve – WKC410C
£17.85
ex VAT
£21.42 inc VAT
SKU: WKC410C
Currently unavailable
The WKC410C is a 10A 4 pole 10kA Miniature Circuit Breaker (MCB) designed for three-phase + neutral systems. With a C Curve trip characteristic, it is ideal for inductive load applications such as small motors, HVAC equipment, and EV charger sub-circuits in commercial three-phase boards, EV installations, and solar PV...
Read full descriptionAccepted payment methods
Description
The WKC410C is a 10A 4 pole 10kA Miniature Circuit Breaker (MCB) designed for three-phase + neutral systems. With a C Curve trip characteristic, it is ideal for inductive load applications such as small motors, HVAC equipment, and EV charger sub-circuits in commercial three-phase boards, EV installations, and solar PV systems.
Rated to 10kA breaking capacity, the WKC410C provides reliable overload and short-circuit protection with full neutral disconnection. It is DIN-rail mounted, bi-directional, and compliant with BS 7671 (18th Edition).
Installer Tip: Select the 10A C Curve when protecting small inductive load circuits. Always check that the board’s fault level does not exceed 10kA before installation.
Key Features
- 10A 4 Pole MCB – C Curve profile
- 10kA breaking capacity – safe for commercial installs
- Four-pole protection: L1, L2, L3 + Neutral
- Bi-directional feed: install top or bottom
- DIN-rail mountable: 18mm per module
- Complies with BS 7671 (18th Edition)
Compare WKC 4 Pole 10kA MCBs (C Curve)
| Model | Rating | Curve | Breaking Capacity |
|---|---|---|---|
| WKC406C | 6A | C Curve | 10kA |
| WKC410C (This Product) | 10A | C Curve | 10kA |
| WKC416C | 16A | C Curve | 10kA |
| WKC420C | 20A | C Curve | 10kA |
Technical specs
- Model: WKC410C
- Type: Miniature Circuit Breaker (MCB)
- Current Rating: 10A
- Curve: C Curve
- Poles: 4P (L1, L2, L3 + Neutral)
- Breaking Capacity: 10kA
- Mounting: 35mm DIN rail, 18mm per module
- Dimensions: Approx. 72mm (W) x 90mm (H) x 77mm (D)
- Standards: BS 7671 (18th Edition), IEC/EN 60898-1
- Brand: WCED
Installation notes
Installation must be performed by a qualified electrician under BS 7671 wiring regulations.
- DIN rail mounting, 18mm per pole
- Ensure fault current ≤10kA
- Designed for inductive/moderate inrush load circuits
- Confirm correct tightening torque on terminals
- Provide sufficient space in enclosure for 4-pole switching devices
FAQs
When should I use the WKC410C?
It is used for protecting small inductive load circuits such as motors, HVAC, and fluorescent lighting where moderate inrush current occurs.
How does a C Curve differ from a B Curve?
B Curve is for resistive loads with minimal inrush, while C Curve tolerates higher inrush, making it suitable for inductive circuits.
Is this MCB suitable for EV charger circuits?
Yes — the WKC410C is suited for EV sub-circuits that draw moderate inrush current, provided fault level is within 10kA.
Does this comply with BS 7671?
Yes, the WKC410C meets BS 7671 (18th Edition) and IEC/EN 60898-1 compliance.
