16A 2 Pole 10kA MCB – B Curve (WKC216B)
£9.08
ex VAT
£10.90 inc VAT
SKU: WKC216B
The WKC216B is a 16A 2 Pole 10kA Miniature Circuit Breaker (MCB) designed for dependable short-circuit and overload protection in small power and lighting applications. With a B-curve tripping characteristic and double-pole isolation, it’s ideal for heating circuits, immersion heaters, control gear, and general sockets where inrush currents remain low....
Read full descriptionAccepted payment methods
Description
The WKC216B is a 16A 2 Pole 10kA Miniature Circuit Breaker (MCB) designed for dependable short-circuit and overload protection in small power and lighting applications. With a B-curve tripping characteristic and double-pole isolation, it’s ideal for heating circuits, immersion heaters, control gear, and general sockets where inrush currents remain low.
Each unit provides full isolation of both live conductors in line with BS EN 60898-1, making it suitable for domestic consumer units, commercial boards, and EV-ready installations.
Installer Tip: 16A B-curve breakers are commonly used for heating, immersion, and control circuits. For equipment with higher start-up currents, upgrade to a C-curve or D-curve version.
Key Features
- 16A rated – suited to heating and small-power loads
- 10kA breaking capacity – safe for higher-fault installations
- 2-pole configuration – isolates both live conductors
- B-curve tripping – fast disconnection for resistive or low inrush circuits
- Bi-directional terminals – can be wired line or load from either end
- Compact 36 mm (2-module) design – easy retrofit on any 35 mm DIN rail
- Complies with IEC/EN 60898-1 and 18th Edition Wiring Regs
- Suitable for consumer units, three-phase panels and EV boards
Compare 2 Pole 10 kA MCB Variants
| Model | Rating | Curve |
|---|---|---|
| WKC216B | 16 A | B Curve (This Product) |
| WKC216C | 16 A | C Curve |
| WKC216D | 16 A | D Curve |
Technical specs
- Model: WKC216B
- Poles: 2
- Rated Current: 16 A
- Curve Type: B
- Breaking Capacity: 10 kA
- Operating Voltage: 230/400 V AC
- Mounting: 35 mm DIN rail (EN 60715)
- Width: 36 mm (2 modules)
- Standards: IEC/EN 60898-1
- Applications: Heating, control gear, small power circuits, EV boards
Installation notes
To be fitted by a qualified electrician in line with BS 7671. Confirm curve type and circuit rating before connection.
- Mount securely on 35 mm DIN rail within an approved enclosure
- Tighten terminal screws to 2.0–2.5 Nm torque
- Label all outgoing circuits clearly
- Test operation with an MCB tester after installation
FAQs
What applications suit a 16 A B-curve MCB?
Commonly used for heating, immersion, and small-power sub-circuits where inrush current is minimal.
Is this breaker compliant with UK regs?
Yes – built to BS EN 60898-1 and compliant with the 18th Edition Wiring Regulations.
Can I use it in an EV board?
Yes – ideal for control or auxiliary feeds in EV consumer units.
Does it isolate both conductors?
Yes – 2-pole isolation disconnects both live lines simultaneously for added safety.
