32A 2 Pole 10kA MCB – C Curve (WKC232C)
£9.08
ex VAT
£10.90 inc VAT
SKU: WKC232C
The WKC232C is a 32 A 2 Pole 10 kA Miniature Circuit Breaker (MCB) designed for reliable short-circuit and overload protection on circuits with moderate inrush current. The C-curve tripping profile provides tolerance for start-up surges — perfect for motors, ring mains, and sub-distribution feeds. Its dual-pole configuration isolates both...
Read full descriptionAccepted payment methods
Description
The WKC232C is a 32 A 2 Pole 10 kA Miniature Circuit Breaker (MCB) designed for reliable short-circuit and overload protection on circuits with moderate inrush current. The C-curve tripping profile provides tolerance for start-up surges — perfect for motors, ring mains, and sub-distribution feeds.
Its dual-pole configuration isolates both live conductors at once, ensuring safety and compliance with BS EN 60898-1. The 36 mm housing mounts directly onto a standard 35 mm DIN rail in consumer units, metal boards, or commercial panels.
Installer Tip: Select a C-curve 32 A MCB for ring mains, motor circuits, or EV sub-feeds that experience moderate inrush current. For purely resistive loads, consider the B-curve version.
Key Features
- 32 A rated – ideal for ring finals, motors, and sub-mains
- 10 kA breaking capacity – withstands high fault levels in commercial installs
- 2-pole isolation – disconnects both live conductors simultaneously
- C-curve tripping – prevents false trips on inrush or startup loads
- Bi-directional terminals – allows flexible wiring from supply or load
- 36 mm (2 modules) width for compact board fit
- Tested to IEC/EN 60898-1 for 18th Edition compliance
Compare 2 Pole 10 kA MCB Variants
| Model | Rating | Curve |
|---|---|---|
| WKC232B | 32 A | B Curve |
| WKC232C (This Product) | 32 A | C Curve |
| WKC232D | 32 A | D Curve |
Technical specs
- Model: WKC232C
- Poles: 2
- Rated Current: 32 A
- Curve Type: C
- Breaking Capacity: 10 kA
- Operating Voltage: 230/400 V AC
- Mounting: 35 mm DIN rail (EN 60715)
- Width: 36 mm (2 modules)
- Standard: IEC/EN 60898-1
- Applications: Ring mains, motor circuits, EV sub-feeds, control gear
Installation notes
Installation must be carried out by a qualified electrician under BS 7671. Always confirm curve selection, cable sizing, and load rating before connection.
- Mount securely on 35 mm DIN rail (EN 60715)
- Torque terminal screws to 2.0–2.5 Nm
- Check insulation resistance and polarity before energising
- Label and document the circuit in the board schedule
FAQs
When should I choose a 32 A C-curve MCB?
Use for circuits with moderate inrush — like motors, EV feeds, or ring mains — where a B-curve could trip too quickly.
Does this isolate both live conductors?
Yes – the 2-pole mechanism disconnects both lines together for safe maintenance.
Can I use it for EV installations?
Yes – suitable for EV control or feed circuits when used within compliant boards. See our EV-ready range.
Is it 18th Edition compliant?
Yes – tested to BS EN 60898-1 and designed for full compliance with the 18th Edition Wiring Regulations.
