2 Pole Modular Contactor – 25 A

The WAC2P25 is a high-quality 2 Pole 25 A modular contactor offering silent, dependable operation for lighting, HVAC, EV charging and automation systems. Compact and DIN-rail mountable, it’s designed to integrate neatly into consumer units and modular enclosures.

Engineered for long service life, it provides quiet switching and low coil consumption – ideal for domestic and light-commercial installations where noise must be minimised. The WAC2P25 complies fully with BS EN 61095 and BS EN 60947-4-1, giving assurance of safety and performance under the 18th Edition Wiring Regulations.

• Silent operation – suitable for residential and commercial installations
• 2-pole design isolates both live conductors on single-phase circuits
• DIN-rail mountable for fast fit into boards and enclosures
• Rated for AC-7a (resistive) and AC-1 (inductive) loads
• Complies with BS EN 61095 and BS EN 60947-4-1

Available Variants (2 Pole Range):

For higher-current or three-phase applications, see our 4 Pole Modular Contactor range or Rotary Isolators.

• Part Code: WAC2P25
• Type: Modular Contactor
• Configuration: 2 Pole
• Rated Current: 25 A
• Operational Voltage: 230/400 V AC 50 Hz
• Utilisation Category: AC-7a (resistive) / AC-1 (inductive)
• Protection: IP20 (BS EN 60529)
• Ambient Temperature: -25 °C to +40 °C
• Mounting: 35 mm DIN rail
• Recommended Torque: 2.0 Nm
• Compliance: BS EN 61095 / BS EN 60947-4-1

Mount on a 35 mm DIN rail inside a suitable IP-rated enclosure. Ensure the load rating and coil voltage are correct for the installation.

• Confirm 25 A rating matches the circuit design
• Mount vertically to aid cooling and service access
• Tighten terminals to 2 Nm torque
• Follow BS 7671 requirements and manufacturer instructions

What is the WAC2P25 used for?

It controls and switches single-phase loads up to 25 A, including lighting, EV chargers, and heating circuits in residential and commercial systems.

Is it quiet in operation?

Yes – the WAC2P25 features a silent coil mechanism ideal for indoor use where audible clicks are undesirable.

Can it be used in EV charger boards?

Yes – commonly used in EV-ready consumer units to switch or isolate circuits in line with BS 7671 requirements.

Is it compliant with UK standards?

Yes – tested and certified to BS EN 61095 and BS EN 60947-4-1 for safe use under the 18th Edition Wiring Regulations.

Can it operate silently in automation systems?

Yes – the low-noise coil design is ideal for home and building automation where quiet operation is essential.