2 Pole Modular Contactor – 32 A

The WAC2P32 is a robust 2 Pole 32 A modular contactor built for precise, noise-free switching of lighting, HVAC, EV charging, and automation loads. Compact and DIN-rail mountable, it fits seamlessly into consumer units and modular enclosures where quiet operation and reliability are essential.

Rated for AC-7a (resistive) and AC-1 (inductive) loads, the WAC2P32 delivers long-term performance under heavy-duty domestic and light commercial use. It is fully tested to BS EN 61095 and BS EN 60947-4-1, ensuring safe operation and easy inspection under the 18th Edition Wiring Regulations (BS 7671).

• Silent operation – ideal for domestic and commercial use
• 2-pole design switches both live conductors for safety
• DIN-rail mount for fast fit into boards or enclosures
• Compatible with AC-7a and AC-1 load categories
• Certified to BS EN 61095 and BS EN 60947-4-1

Available Variants (2 Pole Range):

For larger three-phase systems, see our 4 Pole Modular Contactor range or Rotary Isolators.

• Part Code: WAC2P32
• Type: Modular Contactor
• Configuration: 2 Pole
• Rated Current: 32 A
• Operational Voltage: 230/400 V AC 50 Hz
• Utilisation Category: AC-7a (resistive) / AC-1 (inductive)
• Protection: IP20 (BS EN 60529)
• Ambient Temperature: -25 °C to +40 °C
• Mounting: 35 mm DIN rail
• Recommended Torque: 2.0 Nm
• Compliance: BS EN 61095 / BS EN 60947-4-1

Install on a 35 mm DIN rail inside a suitable IP-rated enclosure. Confirm the load rating and coil voltage before energising.

• Rated 32 A – ensure adequate load diversity on circuits
• Mount vertically for optimum heat dissipation
• Tighten terminals to 2 Nm torque
• Comply with BS 7671 and manufacturer installation guidance

What is the WAC2P32 used for?

It switches and controls single-phase loads up to 32 A, commonly used for heat pumps, EV chargers, lighting banks and automation systems.

Is the WAC2P32 quiet in operation?

Yes – it features a silent coil design ideal for residential and office environments where audible switching is undesirable.

Can it be combined with other protection devices?

Yes – pair with RCBOs or RCDs for overcurrent and earth fault protection. It can also be used alongside SPDs and PME fault detection units.

Does it meet UK standards?

Yes – fully compliant with BS EN 61095 and BS EN 60947-4-1, meeting 18th Edition requirements (BS 7671).

What makes it suitable for EV and renewable systems?

The 32 A rating supports typical single-phase EV chargers and heat pump loads up to 7 kW while maintaining quiet operation and regulatory compliance.