Surge Protection Devices (SPD) – Domestic & Commercial
Surge Protection Devices (SPDs) protect electrical installations from transient overvoltage caused by switching events and lightning-related surges. Under the 18th Edition of BS 7671, surge protection must now be considered on all new consumer unit installs and upgrades.
Our range includes Type 2 SPDs, retrofit surge modules, and pre-wired metal enclosure kits – suitable for domestic properties, EV charger installs, heat pumps, solar inverters and three-phase systems.
Quick answer: Most UK homes and small commercial sites require a Type 2 SPD installed at the consumer unit to comply with modern wiring regulations and protect appliances from voltage spikes.
Read more about surge protection
We stock:
- Type 2 SPDs – the standard choice for domestic and light commercial installs
- Single and three-phase options – including 4-pole units
- Standalone SPD modules – compact retrofit solutions
- Pre-wired SPD enclosure kits – quick-fit protection alongside consumer units
All units are tested to BS EN 61643, UK stocked and backed by manufacturer warranties.
4 Way Metal Enclosure – 40A B Curve MCB + Surge Protection (WMKB240BSP)
£29.40
The WMKB240BSP is a compact 4 way metal enclosure pre-fitted with a 40A B Curve MCB and Type 2 Surge Protection Device (SPD). Built for EV charger supplies, outbuildings, and small sub-mains, it combines overload protection and surge defence in a durable steel housing. The...
4 Way Metal Enclosure – 40A C Curve MCB + Surge Protection (WMKB240CSP)
£29.40
The WMKB240CSP is a compact 4 way metal enclosure pre-fitted with a 40A C Curve MCB and Type 2 Surge Protection Device (SPD). It’s designed for EV charger supplies, heat pump circuits, and renewable installs where higher inrush currents are expected. Built in a robust...
PME Fault Detection Consumer Unit – 4 Pole 63A RCBO with SPD, Load Balancing & kWh Meter (WMEPME12/LBK)
£167.10
The WMEPME12/LBK PME Fault Detection Consumer Unit is the largest model in the range, a 12-module steel enclosure combining a 4 Pole 63A Type A RCBO, Type 2 SPD, PME load balancing relay, and an integrated kWh meter. It provides full PEN fault detection, surge...
PME Fault Detection Consumer Unit – 4 Pole 63A RCBO with SPD (WMEPME10/SP)
£131.75
The WMEPME10/SP PME Fault Detection Consumer Unit is a larger 10-module metal enclosure fitted with a 4 Pole 63A Type A RCBO and an integrated Type 2 Surge Protection Device (SPD). It provides full PME/PEN fault detection, automatically disconnecting Live, Neutral, and Earth within 5...
Twin RCD Metal Consumer Units WME22100TR/SP
£111.45
The WME22100TR/SP Twin RCD Metal Consumer Unit is the top-capacity model in the range, supplied with a 100A main switch, two 100A RCDs, and a factory-fitted Type 2 Surge Protection Device (SPD). It provides 14 usable ways across a 22-module enclosure, making it the go-to...
Why Surge Protection Is Now Standard
Modern properties contain sensitive electronics – boilers, smart controls, EV chargers, heat pumps and consumer electronics. A single voltage spike can cause irreversible damage. Installing an SPD at the distribution board protects the entire installation and reduces the risk of costly equipment failure.
Domestic & Whole House Surge Protection
A whole house surge protector is typically a Type 2 SPD fitted within the consumer unit. It protects all final circuits from transient overvoltage events.
Popular choice: Single Module Surge Protection Device for straightforward retrofits.
EV Chargers, Heat Pumps & Renewables
Surge protection is especially important on inverter-driven systems. For compliant EV installs, many electricians choose integrated protection such as the 4-Way EV Protection Unit with SPD.
For higher-load or renewable systems, explore our three-phase protection options.
Choosing the Right SPD Type
- Type 1 SPD – typically required where lightning protection systems are installed.
- Type 2 SPD – standard for most UK domestic and commercial consumer units.
- Single-phase vs three-phase – match pole configuration to supply type.
- Integrated kits vs modules – choose based on board space and retrofit requirements.
18th Edition Compliance
BS 7671 requires surge protection to be assessed on every installation. In most residential and light commercial environments, a Type 2 SPD is required unless a formal risk assessment determines otherwise.
Why Buy From Power & Data UK?
All surge protection devices are BS EN 61643 certified, UK stocked and available with next-day delivery on qualifying orders. We provide clear technical specs and straightforward returns support for trade buyers.
Related Categories
FAQs on Surge Protection
Is surge protection mandatory in the UK?
Surge protection must be considered under BS 7671. In most modern domestic installs, fitting a Type 2 SPD is standard practice.
Can I retrofit an SPD to an existing consumer unit?
Yes. Standalone modules and external enclosure kits allow surge protection to be added without replacing the full board.
Do EV chargers require surge protection?
Yes – most EV charger manufacturers and current wiring regulations require surge protection to be included as part of a compliant installation.