Forward orders accepted
13A IP66 Weatherproof Switched Fused Spur
£9.40 ex. VAT
Was £12.00 ex. VAT
£11.28 inc. VAT
20A Weatherproof IP65 1 Gang 2 Way Retractive Switch (WS1GR)
£9.10
ex VAT
£10.92 inc VATWas £12.75 ex VAT
SKU: WS1GR
Forward orders accepted — ask us for the current lead time
Ask us about availability
Currently unavailable
The WS1GR is a 20A weatherproof IP65 1 gang 2 way retractive switch designed for external control circuits that require a momentary input — such as doorbells, contactor triggers, or EV charger enable signals. Its spring-return (non-latching) mechanism and fully sealed polycarbonate housing make it ideal for exposed environments where...
Read full descriptionAccepted payment methods
Description
The WS1GR is a 20A weatherproof IP65 1 gang 2 way retractive switch designed for external control circuits that require a momentary input — such as doorbells, contactor triggers, or EV charger enable signals. Its spring-return (non-latching) mechanism and fully sealed polycarbonate housing make it ideal for exposed environments where reliability and compliance matter.
Installer Tip: Commonly used as a momentary input for smart devices or EV chargers — for example, as an external ‘start charge’ or ‘boost mode’ trigger. The retractive action ensures safe operation without leaving the circuit latched on.
- 20A rated momentary switchgear for control or trigger circuits
- IP65 weatherproof protection – fully sealed against dust and water jets
- Retractive (spring return) mechanism – non-latching, safe for triggers
- High-impact polycarbonate housing with clear gasket seal
- Multiple gland entry points (top, bottom & rear)
- Complies with BS EN 60669-1 – suitable for outdoor and industrial use
| Model | Gangs | Operation | Ingress Rating | Common Use |
|---|---|---|---|---|
| WS1G2W | 1 | 2 Way | IP65 | Standard lighting or power control |
| WS1GR | 1 | Retractive (momentary) | IP65 | EV charger or bell trigger |
| WS2G2W | 2 | 2 Way (each) | IP65 | Dual zone outdoor switching |
This retractive version completes the Weatherproof Switch Range, offering safe, controlled operation for specialist outdoor applications including EV charging bays, automation systems, and external access controls.
Technical specs
- Model: WS1GR
- Current Rating: 20 A max
- Operation: 1 Gang 2 Way Retractive (momentary)
- Enclosure Type: Polycarbonate, IP65 sealed
- Ingress Protection: IP65 – dust-tight & water-resistant
- Mounting: Surface mount (rear / side entries)
- Voltage Rating: 230 V AC
- Colour: Grey body / black module
- Operating Temperature: -20 °C to +50 °C
- Standards: BS EN 60669-1 / BS 7671 compliant
Installation notes
Pre-assembled for quick fit-out. Always ensure cable glands and gaskets are correctly seated to maintain IP65 protection. Suitable for mounting on posts, external walls, or enclosures.
- Verify retractive (momentary) operation before wiring
- Install vertically with lid facing upward to prevent water pooling
- Use supplied seals and screws to maintain waterproof integrity
- Isolate supply and test functionality post-installation
FAQs
What does ‘retractive’ mean?
Retractive (or momentary) switches return to their default position once released. They only make contact while pressed — ideal for triggers, bells, and smart control inputs.
Is the WS1GR suitable for EV chargers?
Yes. Many EV charger setups use a retractive switch as a manual override or boost trigger. This IP65 model is perfect for exposed outdoor use.
Can it be used for lighting circuits?
Only where a momentary input is required, such as motion-activated relays or smart control systems. For normal lighting, use the WS1G2W instead.
Is it supplied with glands and fixings?
Yes – glands, seals, and mounting screws are included for a fully waterproof installation.
