4 Pole Modular Contactor – 25 A
£15.90
ex VAT
£19.08 inc VAT
SKU: WAC4P25
Forward orders accepted — ask us for the current lead time
Ask us about availability
Currently unavailable
The WAC4P25 is a reliable 4 Pole 25 A modular contactor designed for quiet, dependable switching across multi-circuit lighting, HVAC, EV and automation systems. Compact and DIN-rail mountable, it fits neatly into modular enclosures and consumer units where noise control and compliance are important. Tested to BS EN 61095 and...
Read full descriptionAccepted payment methods
Description
The WAC4P25 is a reliable 4 Pole 25 A modular contactor designed for quiet, dependable switching across multi-circuit lighting, HVAC, EV and automation systems. Compact and DIN-rail mountable, it fits neatly into modular enclosures and consumer units where noise control and compliance are important.
Tested to BS EN 61095 and BS EN 60947-4-1, the WAC4P25 provides safe, long-life operation under the 18th Edition Wiring Regulations (BS 7671). It’s suited to both single and three-phase circuits requiring multi-pole isolation or neutral disconnection.
Installer Tip: Choose the 25 A 4-pole model for multi-circuit lighting or control systems needing neutral disconnection. Keep coil leads away from signal wiring to avoid induced voltage on automation loops.
- Silent-coil design – ideal for residential and commercial use
- 4-pole configuration for multi-circuit or three-phase control
- DIN-rail mount for fast fit into boards and enclosures
- Compatible with AC-7a and AC-1 load categories
- Complies with BS EN 61095 and BS EN 60947-4-1
Available Variants (4 Pole Range):
| Part Code | Description | Rated Current (A) |
|---|---|---|
| WAC4P20 | 4 Pole Modular Contactor | 20 A |
| WAC4P25 | 4 Pole Modular Contactor | 25 A |
| WAC4P32 | 4 Pole Modular Contactor | 32 A |
| WAC4P40 | 4 Pole Modular Contactor | 40 A |
For single-phase installations, see our 2 Pole Modular Contactors or Rotary Isolators for main switch options.
Technical specs
- Part Code: WAC4P25
- Type: Modular Contactor
- Configuration: 4 Pole
- Rated Current: 25 A
- Operational Voltage: 230 / 400 V AC 50 Hz
- Utilisation Category: AC-7a (resistive) / AC-1 (inductive)
- Protection: IP20 (BS EN 60529)
- Ambient Temperature: -25 °C to +40 °C
- Mounting: 35 mm DIN rail
- Recommended Torque: 2.0 Nm
- Compliance: BS EN 61095 / BS EN 60947-4-1
Installation notes
Mount on a 35 mm DIN rail within a suitable IP-rated enclosure. Verify coil voltage and current rating before energising.
- Rated 25 A – confirm load type and current before selection
- Install vertically to maximise heat dissipation
- Tighten terminals to 2 Nm torque
- Comply with BS 7671 and manufacturer guidelines
FAQs
Where is the WAC4P25 used?
It’s ideal for multi-circuit lighting control, HVAC and automation systems requiring 4-pole switching up to 25 A.
Can it handle three-phase loads?
Yes – the 4-pole layout supports three-phase operation with optional neutral isolation.
Is the WAC4P25 quiet in operation?
Yes – its silent coil design makes it suitable for noise-sensitive installations such as offices and residential buildings.
Can it be used with protection devices?
Yes – pair with RCBOs, RCDs and SPDs for complete circuit protection.
Is it BS 7671 compliant?
Fully compliant with BS EN 61095 and BS EN 60947-4-1, meeting 18th Edition standards for isolation and switching.
