- 01923 969309
- Sales@pandd.co.uk
Automatic 15% discount for all contractors on all orders over £100 excluding VAT
-
0
-
Your cart is currently empty.
-
The WME10/SOL1 solar consumer unit groups a 20A Type A RCBO, 32A rotary isolator and kWh meter in one factory-assembled metal enclosure. For a domestic solar PV project with this specification, it reduces separate component assembly and keeps circuit protection, isolation and generation monitoring together.
At 232mm wide × 240mm high × 112mm deep, the board gives you a known footprint to check before installation. Its IP40 enclosure is intended for indoor use.
Protection, isolation and metering in one board
- 20A Type A RCBO: combines overcurrent and residual current protection; the manufacturer specifies 30mA sensitivity and 6kA breaking capacity for the WRB device.
- 32A rotary isolator: provides a rotary switching point for the specified AC circuit.
- Integrated kWh meter: provides a local energy reading for generation monitoring.
- Factory assembly: reduces the separate component fitting and wiring needed on site, with final connection and commissioning still required.
Match the board to the inverter specification
Choose the board against the inverter manufacturer’s protection requirements and the designed circuit current. The 32A isolator rating does not turn the included 20A RCBO circuit into a 32A circuit. The isolator is specified for AC; this board does not replace any DC-side isolation or protection required by the PV design.
The product photograph also shows a main switch and SPD. If either is required for your project, contact Power & Data UK to confirm the complete supplied build before ordering; these parts are not explicitly itemised in the manufacturer's WME10/SOL1 component listing. Confirm spare usable ways separately if expansion is planned.
Compare solar consumer unit configurations
| Product | Listed components | Choose when |
|---|---|---|
| WME10/SOL1 — this product | 20A Type A RCBO, 32A rotary isolator and kWh meter | The specified solar circuit needs RCBO protection, rotary isolation and generation metering grouped in one assembly. |
| WME06-SOL | 100A main switch, MCB and 22 × 58 fuse holder | The project specifies that alternative switch, MCB and fuse-holder arrangement; check the complete component ratings before ordering. |
For equipment on the DC side of the inverter, view the solar string combiner boxes and check the required string arrangement and ratings separately.
Download the WME10/SOL1 manufacturer datasheet (PDF) to check the specification. Add WME10/SOL1 to your basket once the build matches the circuit design. For a different component mix or a required delivery date, contact Power & Data UK with the inverter model, circuit specification and quantity.
