EV Surge Protection Devices for Charger Circuits
EV surge protection devices are used to protect electric vehicle charger circuits from transient overvoltage caused by lightning activity, switching events, and wider supply disturbances. A properly specified Type 2 SPD for an EV charger helps protect charger electronics, control boards, and other sensitive components from sudden voltage spikes.
As EV charging equipment becomes more advanced, surge protection is increasingly important on both domestic and commercial EV installations, especially where chargers are installed outdoors or connected to longer cable runs.
Quick answer: An EV surge protection device is typically a Type 2 SPD fitted on the charger supply circuit to help protect EV charging equipment from damaging transient overvoltages.
Read more
EV chargers contain sensitive electronics that can be affected by short-duration overvoltage events. Adding surge protection to the charger circuit helps reduce the risk of damage, nuisance faults, and avoidable maintenance issues, particularly on exposed or higher-value installations.
- Type 2 SPD protection – commonly used for EV charger circuits
- Suitable for domestic and commercial installs – from single charger setups to larger sites
- Helps protect charger electronics – against transient voltage spikes
- Useful on outdoor EV installations – where exposure and cable runs may increase risk
- Compact formats available – suited to boards and EV protection enclosures
Looking for complete charger protection setups? Browse our EV consumer units & kits, wider surge protection range, and EV surge protection boards. For delivery and returns, see our delivery information and returns policy.
4 Way Metal EV Protection Unit – 32A B Curve A-Type RCBO + SPD (WMRC32BSP)
£34.80
WMRC32BSP is a 4 way metal EV protection unit supplied with a 32A B Curve A-Type RCBO and built-in surge protection. Designed for single-phase EV charger circuits, it provides overload, earth leakage, and surge protection in one compact pre-configured enclosure. Installer Tip: The dual switch...
EV Connection Unit – 100A Main Switch + Surge Protection + 20A MCB (WEVCU20BSP)
£34.19
The WEVCU20BSP is a compact 5-module EV connection unit that combines surge protection, overload protection, and isolation in one enclosure. Housed in a 5-way IP40 metal consumer unit, it’s pre-wired and fitted with a 100A double-pole main switch, Type 2 SPD, and a 20A MCB...
8 Way IP65 EV Connection Unit with Surge Protection – 32A MCB (WPEVCU32BSP/8)
£43.55
The WPEVCU32BSP/8 is an 8 Way IP65 EV Connection Unit with Surge Protection designed for EV charger supplies that require a weatherproof, regulation-compliant solution. It combines isolation, overload protection, and surge defence in a compact, preassembled board — ready to install straight out of the...
4 Way Metal EV Protection Unit – 40A B Curve A-Type RCBO + SPD (WMRC40BSP)
£34.80
WMRC40BSP is a 4 way metal EV protection unit supplied with a 40A B Curve A-Type RCBO and built-in surge protection. Designed for EV charger circuits, it provides combined overload, earth leakage, and surge protection in one compact pre-configured enclosure. Installer Tip: The dual switch...
4 Way Metal EV Protection Unit – 40A C Curve A-Type RCBO + SPD (WMRC40CSP)
£34.80
The WMRC40CSP is a 4 Way Metal EV Protection Unit that combines a 40 A C-Curve A-Type RCBO with a Type 2 SPD inside a durable, powder-coated steel housing. Built for EV charger installations with higher inrush or inductive loads, it delivers overload, earth-leakage, and...
Why EV Charger Circuits Need Surge Protection
EV chargers contain electronic components that can be vulnerable to sudden voltage spikes. An SPD for an EV charger helps reduce the risk of transient overvoltage reaching the charger and damaging internal components, particularly where the installation is outdoors, connected to longer sub-main runs, or part of a more exposed electrical system.
What an EV Surge Protection Device Does
An EV surge protection device works by limiting transient overvoltage on the charger supply circuit. In most cases, this means diverting surge energy away from sensitive equipment so the charger is less exposed to damaging spikes caused by lightning-related events or switching disturbances on the network.
Typical Applications
- Domestic EV chargers – where smart charging electronics need added protection
- Commercial EV charge points – where multiple chargers may increase the value of the protected equipment
- Outdoor charger installations – where surge risk may be more of a concern
- Board upgrades and retrofits – where surge protection is being added to an existing EV circuit
- Specialist charger setups – where wider protection design is part of the specification
Type 2 SPD for EV Chargers
A Type 2 SPD is the most common surge protection format used for EV charger circuits. It is typically selected for installations where protection against transient overvoltage is needed at the distribution level, helping support the reliability of the charger and associated electronics.
Domestic vs Commercial EV Surge Protection
Domestic installs often use compact EV SPDs fitted within or alongside the charger protection arrangement, while commercial sites may require a wider surge strategy depending on the size of the installation, the number of chargers, and the board configuration. The right SPD always depends on the overall installation design.
Used Alongside EV Boards & Protection Devices
These products are commonly specified alongside EV consumer units and kits, EV surge protection boards, wider surge protection devices, and PME fault detection products where the charger design calls for them.
FAQs on EV Surge Protection Devices
Do EV chargers need surge protection?
Many EV charger installations benefit from surge protection because chargers contain sensitive electronics that can be affected by transient overvoltage. The exact requirement depends on the installation design and risk assessment.
What type of SPD is used for an EV charger?
In many cases, a Type 2 SPD is used on the EV charger circuit to help protect against transient overvoltage events.
Can surge protection be added to an existing EV circuit?
Yes, in many cases surge protection can be added as part of an upgrade or board modification, provided the overall design and enclosure arrangement are suitable.
Are EV surge protection devices only for commercial chargers?
No. They are used on both domestic and commercial EV charger circuits where protection against transient overvoltage is part of the design.
Why Buy EV Surge Protection Devices from Power & Data UK?
Power & Data UK supplies trade-focused EV and circuit protection products with dependable UK stock, practical product selection, and fast dispatch. Orders over £30 qualify for free UK mainland next-day delivery, and products are backed by a 2-year manufacturer warranty. For unwanted items, see our returns policy.