Type A RCBO with Surge Protection Solus Pack
This Solus Pack combines a Type A high immunity RCBO with built-in surge protection — ideal for EV charger points, heat pump installs, and any circuit requiring both residual and surge protection in a compact, standalone unit. It’s pre-wired, fully compliant with the 18th Edition, and built for fast turnaround...
This Solus Pack combines a Type A high immunity RCBO with built-in surge protection — ideal for EV charger points, heat pump installs, and any circuit requiring both residual and surge protection in a compact, standalone unit. It’s pre-wired, fully compliant with the 18th Edition, and built for fast turnaround without the need for a full consumer unit enclosure.
Available in multiple current ratings and trip curves to suit different load profiles:
Available Variants:- WER32B/Solus: 32A B Curve RCBO + Built-in SPD
- WER32C/Solus: 32A C Curve RCBO + Built-in SPD
- WER40B/Solus: 40A B Curve RCBO + Built-in SPD
- WER40C/Solus: 40A C Curve RCBO + Built-in SPD
Each unit includes a twin-handle Type A RCBO with clear fault indication, and a Type 2 SPD wired in for full surge protection — all built to order with a 3-working day lead time.
- Type A 30mA RCBO – 10kA, high immunity, switched neutral
- Built-in Type 2 Surge Protection – 18th Edition Amendment 2 compliant
- Twin handle design – shows overload vs earth leakage trips
- Supplied pre-wired – quick to install and easy to test
- Ideal for EV chargers, heat pumps, and circuit upgrades
What is the Solus Pack used for?
It’s designed for situations where you need surge protection and full circuit protection but don’t require a full consumer unit – ideal for EV chargers, renewables, or upgrades.
What’s the difference between B and C curve options?
B Curve RCBOs trip faster on lower fault currents – typically used for domestic circuits. C Curve is better for higher inrush loads like motors or EV chargers. Choose based on your load profile.
Does this provide full disconnection?
Yes – the RCBO includes switched neutral, ensuring both live and neutral conductors are disconnected during a fault.
Can I use this for EV charger installations?
Yes – the Type A high immunity RCBO is suitable for most domestic EV chargers, and the built-in SPD ensures compliance with 18th Edition surge protection requirements.
Are the RCBO and SPD pre-wired?
Yes – the unit is supplied fully wired for fast installation. Just mount, terminate tails, and earth the SPD as per standard practice.
Which Solus Pack variant should I choose?
Use B Curve for general domestic circuits, and C Curve for circuits with higher inrush current (e.g. EV chargers, motors). Choose 32A or 40A based on your circuit’s load and breaker spec.
- RCBO Type: Type A, 30mA High Immunity
- Breaking Capacity: 10kA
- Voltage Rating: 230V AC
- Tripping Characteristics: B or C Curve
- Available Ratings: 32A and 40A
- SPD: Type 2 built-in surge protection
- Disconnection: Twin switch, double pole (Live + Neutral)
- Conformity: IEC 61009, EN 61009
- Recommended Torque: 2.5Nm
- Dimensions (W x H x D): Approx. 35mm x 82mm x 77mm
This Solus Pack is supplied pre-wired and designed for standalone or retrofit installs where full circuit protection and surge compliance are required without a full consumer unit enclosure.
- Install within an enclosure or protected space
- Ensure SPD earth connection is as short as possible
- Confirm B or C curve compatibility with connected load
- Twin-handle system clearly indicates overload vs leakage faults
